Laboratory Equipments

Product Details:

Fully made shock proof with dual wave length for viewing at short wave length (254 nm) & long wave length (365 nm) with one extra visible day light having individual switch to operate the desire wave length working on 230 watts 50 Hz. AC supply & supplied without filter. Body Made of M.S. attractively epoxy painted.

Features:

• For Sterility Test
• Vacuum filter holder for sterility test to hold membrane

Product Details:

We are instrumental in offering high quality BOD (Biological Oxygen Demand) Incubator to the clients. Our BOD Incubator has castor wheel mounted on it, and is double walled with inner chamber of stainless steel & outer wall of M.S. sheet duly powder coated. Double walled back of the BOD Incubator is fitted with air circulation fan for maintaining temperature uniformity throughout the chamber. Full view of inner glass door permits inspection of specimens without disturbing the same. Lock &Key arrangement is provided in the double walled outer door. Our BOD Incubator is fitted with door operated illumination lamp inside the chamber, and the front panel is provided with separate indicator lamps for main, heating & incoming voltage.

Features:

• Supplied with adjustable shelves, cord & plug to work on 220-230 volts AC suppl,
• Works at temperature range of 5°C to 60°C
• Accuracy ±0.5°C
• Temperature is controlled by digital temperature indicator— cum — controller

Specification:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days

Product Details:

Features:

• Reliable Convenient method of steam sterlization.
• Inner chamber made of thick S.S.
• Outer Chamber made of M.S. / S.S. immersion type
• heater should be provided. Lid is made up of S.S. and die pressed.
• It is equipped with pressure guage, steam release valve and safety valves.
• This instrument supplied with Aluminium / S.S.Basket.
• Pressure Controls by spring Valves.
• It is used for sterilization under working steam pressure
• Fitted with silicon rubber gasket jointless, to work
• on 230 volts A./C. only.

Optional Accessories:

• Foot lifting arrangement.
• Digital Temperature indicator cum Controller
• Water Level indicator
• Auto Cut off.

 

Additional Information:

• Item Code: BTL-1

Product Details:

Supplied with electrode buffer solution, dust cover & stand. Designed to meet the needs of serious pH/mV measurements in labs. These instruments provide accurate pH readings in a wide variety of samples. Detachable electrode ensures replacement convenience.

Additional Information:

• Item Code: BTL-14

Product Details:

BTL-1 AUTOCLAVE VERTICAL LABORATORY TYPE

HSN CODE - 84192010 - GST @ 18%

In Autoclave the Inner chamber is made up of thick stainless steel (304) & the Outer body is made up of thick Mild Steel / Stainless Steel. The chamber is absolutely leak proof & can be operated at any selected point in between 5 to 20 pounds per sq.inch.

Additional Information:

• Delivery Time: 10-15 DAYS
• Packaging Details: AS PER THE CUSTOMER REQUIREMENT

Product Details:

In Autoclave the Inner chamber is made up of thick stainless steel (304) & the Outer body is made up of thick Mild Steel / Stainless Steel. The chamber is absolutely leak proof & can be operated at any selected point in between 5 to 20 pounds per sq.inch.

Additional Information:

• Item Code: BTL
• Production Capacity: AOR
• Delivery Time: 10 DAYS
• Packaging Details: AOR

Product Details:

Consists of S.S. holders in manifold of, membrane filters. The top of the holders are connected to the outlets of the flushing tube . Supplied without Wolfs Bottle & vaccum/Pressure pump. These units are used for sterility testing when the membranes filter is to be removed from the holder for incubation in culture media. Filtration areas is & has a holding capacity though only vacuum is required for filtration; some pressure is required for flushing liquids.

Without filter holder

• 3 Test
• 6 Test

Additional Information:

• Item Code: BTL-47
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days
• Packaging Details: as per customer requirement

Product Details:

Heating mantle type to get quick heating most suitable for all types of digestion & distillation condenser rack for water circulation in condenser. Fume duck pipe made of Stainless steel for driving away fumes operating on 230 Volts.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days

Product Details:

The Vacuum Filter Holder is used for sterility test to hold membrane completely. The Vacuum Filter Holder. which we offer. is made up of Stainless Steel of 316 quality. We are known as one of the leading Vacuum Filter Holder Manufacturers and Suppliers in India. The Vacuum Filter Holder comes in different sizes like.

Features:

• For Sterility Test
• Vacuum filter holder for sterility test to hold membrane
• completely made up of Stainless Steel 316 quality.

Additional Information:

• Item Code: BTL-18
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days

Product Details:

Features:

• Autoclave vertical type with complete stainless steel, electrically with air release nozzle.
• With gasket, lid, safety valve, pressure gauge & steam release cock

Additional Information:

• Item Code: BTL-2
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days

Product Details:

The Electric Bunsen is ideal for non-contact heating of test tubes, crucibles, small flasks and beakers

Additional Information:

• Item Code: BTL-6
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days
• Packaging Details: As per request

Product Details:

We offer BTL-1 Vertical Autoclave Sterilizer to the die. Our Vertical Autoclave has an inner chamber made up of thick stainless steel (304) & the outer body is made up of thick MS Stainless Steel. Further, we are a prime manufacturer and Supplier of Vertical Autoclave.

Optional Accessories:

• Fully Automatic Autoclave (Charges Extra)
• Water level cut off system
• Pressure cut off switch
• Digital temperature controller cum indicator

Features:

• Inner chamber made of thick S.S.
• Outer Chamber made of M.S. / S.S. immersion type
• heater should be provided. Lid is made up of S.S. and die pressed.
• It is equipped with pressure guage, steam release valve and safety valves.
• This instrument supplied with S.S. Basket.
• Pressure Controls by spring Valves.
• It is used for sterilization under working steam pressure
• Fitted with silicon rubber gasket jointless, to work

Optional Accessories:

• Foot lifting arrangement.
• Digital Temperature indicator cum Controller
• Water Level indicator
• Pressure Cut off

Product Details:

Anti-corrosive Powder coated (70 to 80 microns) durable, 1.2mm & 1.0mm heavy duty CRCA (as per IS: 513) sheets with rigid structure/ M.S. Steel 20 Gaze Anti Corrosive Powder Coated.

Product Details:

For measuring the relative consistency during the manufacture & use of paints varnishes lacquers & other visco products.

Product Details:

Useful for hardening, annealing, reheating etc. Light weight high temperature ceramic fiber wool insulation. Outer made up of heavy gauge stainless steel 304. Heating elements are of KANTHAL ‘A-1 Wire’. Two Pilot Lamps with Microprocessor based Digital Temperature Controller. The power plug to work.

Product Details:

The housing is constructed with heavy guage mild steel & finished with powder coated epoxy paint. Counting plate with illuminated standard wolfhugel ruling is fitted with magnifying glass on front slope. Each touch of Marking Pencil in the colony count by 1 & the flowing LED Digital depicts the total colony count. Maximum colony count possible upto. A fluorescent light is available. Provided with a manual reset of digital display. On / Off switch, counting plate, cord & plug. To work on.

Additional Information:

• Item Code: BTL-10
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days

Product Details:

For measuring the relative consistency during the manufacture & use of paints varnishes lacquers & other visco products.

Additional Information:

• Item Code: BTL-17

Product Details:

The Environmental Test Chamber is used for creating ideal conditions for industrial component / product research and bio technical specification test. The Environmental Test Chamber is the most accurate and reliable chamber for long-term high temperature and RH testing. The Environmental Test Chamber has temperature range from 10°C to 60°C with an accuracy 0.5°C and relative humidity range from 40% RH to 85%.

Features:

• A positive vertical air circulation ensures temperature and RH uniformity.
• Digitally set, temperature and Humidity controller with direct digital read out in temperature and percentage RH.
• Low pressure Boiler to generate steam for chamber humidification.
• Well balanced refrigeration system.
• Double walled construction inner chamber S.S. and outside of Mild steel beautifully powder coated.
• The chamber is provided with modular removable shelves made of S.S. for complete flexibility in use.
• A key lockable insulated door having positive door gasket seals doors perfectly.
• Control panel mounted on the top of the Unit.
• It work on 230 volts. AC. only.

 

Sizes:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 5
• Delivery Time: 7 working days
• Packaging Details: AS PER CUSTOMER REQUIREMENT

Product Details:

Useful for hardening, annealing, reheating etc. Light weight high temp ceramic fiber wool insulation. Outer body thick P.C.R.C. sheet duly powder coated. Heating elements are of KANTHAL ‘A-1 Wire’. Two Pilot Lamps with Microprocessor based Digital Temp Controller. & to work.

Product Details:

Additional Information:

• Item Code: BTL-40

Product Details:

Apparatus burette, titration beaker with Teflon dish cover, 2-electrode & solenoid valve, 2 pcs apparatus. Stirring portion provided separately to prevent spillage of corrosive regent on main electronic circuit box & for easy maintenance. Minimum detect ability of moisture.

Additional Information:

• Item Code: BTL-31
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days

Product Details:

Melting Point in 250ml beaker silicon oil bath. Teflon dish cover for holding heater, capillary stand,3 capillaries holes, sensor & thermometer, 12V long lasting immersion heater connected to transformer in order to give quick heating & fine calibration, no shock hazard, built in heavy duty magnetic stirrer & heavy duty magnet used for trouble free & uniform stirring, glare free back side illumination & magnifying viewing glass & 3 way rotary switch  to control heating rate for diff stage of M.P. plus additional regulator for further heating control. 3 Capillaries stand & provision to keep 6mm glass boiling tube. Provided with 1 pkt of capillaries & 1 boiling tube.

Features:

• It is usable to estimate the Melting Point of chemicals,
• Pharmaceuticals, Food Etc.,
• This is very useful to determine the melting point of any
• substance.
• Max Temperature up t 350°C. Consists with aluminium
• cylindrical block for heating, Radial holes admits a
• thermometer and glass capillary.
• Temperature Controlled by energy regulator.
• Regulator fitted to the unit and with high, low heat switch.

Additional Information:

• Item Code: BTL-36
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days

Product Details:

Full unit made of S.S to provide pyrogen free distilled water, condenser can be opened for periodic cleaning. Easy wall mounting, easy replaceable heating element. The lid perfectly get sealed inside the collar on head of the tank which avoids loss steam & jumping of lid.

Additional Information:

• Production Capacity: 4LTRS - 20LTRS
• Delivery Time: 10-15DAYS
• Packaging Details: AOR

Product Details:

Anti-corrosive Powder coated (70 to 80 microns) durable, 1.2mm & 1.0mm heavy duty CRCA (as per IS: 513) sheets with rigid structure/ M.S. Steel 20 Gaze Anti Corrosive Powder Coated.

Product Details:

Most Advance Bench top ultrasonic cleaner for surgeon, hospitals & laboratories puts an end to the potentially dangerous, inefficient, ineffective hand scrubbing of delicate expensive instruments by adopting the cleaning technology used world –over:

• SMPS power source ensure an amazing >90 % efficiency, compared to 60% of conventional liner source.
• 50% of the weight & size of conceptional machines.
• Energy saving faster cleaning, higher reliability.
• Optional mechanical or presetteble 15 minutes digital countdown timer with display.

Product Details:

Additional Information:

• Item Code: BTL-55
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days

Product Details:

Double walled construction outer made of mild steel powder coated & inner S.S.304. Toughened glass window from both sides. Top lid having holes for keeping viscometer holders, circulators pump is provided on top of the body with controlled panel consists of switches & lamps for mains & controls fitted with digital display controller temperature range 5 ºC above to 95 ºC

Viscocity Clamps at Extra Cost Rs.675/-
Digital Timer range 0 to 999 minutes Rs.3000/-

Product Details:

Additional Information:

• Item Code: BTL-33
• Port of Dispatch: Mumbai
• Delivery Time: 10 days

Product Details:

Useful for measuring conductivity of homogeneous electrolytic solutions. Supplied with conductivity cell of cell constant 1, cell stand & standard conductivity solution.

Additional Information:

• Item Code: BTL-15
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days

Product Details:

We bring forth the cutting-edge range of Vacuum Oven with double walled construction. The Vacuum Oven has inner chamber of thick stainless steel 304 quality. The outer chamber of Round & Rectangular Vacuum Oven is made up of mild steel sheet pre-greased and pretreated for rust proofing and is also powder coated. The Vacuum Oven has high-grade glass wool insulation between the chambers to avoid heat loss.

Features:

• Uniform drying under Vacuum
• Temperature ranges from 50°C to 200°C with ± 2°C accuracy
• Precise Vacuum control to 30Hg displayed on Analog guage
• Temperature Controlled by digital Temperature Indicator cum controller
• Vacuum chamber is wrapped with set of high quality heaters for quick and uniform heating
• Door has a thick tempered toughned glass window
• Perfectly sealed with silicon rubber gasket for observation without disturbing thermal condition
• Proper door alignment to ensure excellent Vacuum performance and operators' safety
• Positive screw to tighten the lid to obtain perfect seal
• Fitted with diaphragm valves and vacuum gauge
• Control panel with Temperature Controller, Switches and indicating lamps provided on the front panel.
• Working chamber 30 x 22.5 Cm
• Suitable for 230, AC, 50Hz
• Available in rectangular chamber also
• Vacuum control and relief valves located on front of unit for convenient monitoring

Sizes in Rectangular Model:

Sizes in Round Model:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days

Product Details:

Insta Mixer (Cyclo Mixer) with variable speed controller suitable for tubes upto 100 ml. CYCLO MIXER is supplied by the company, REMI. This Cyclo Mixer is designed for mixing in laboratories, schools and factories. This Cyclo Mixer is supplied with an all interchangeable mixing heads and facilitates speed regulation through knob provided in control panel.

Additional Information:

• Item Code: BTL-13

Product Details:

Full unit made of S.S to provide pyrogen free distilled water, condenser can be opened for periodic cleaning. Easy wall mounting, easy replaceable heating element. The lid perfectly get sealed inside the collar on head of the tank which avoids loss steam & jumping of lid.

Additional Information:

• Item Code: BTL63
• Production Capacity: 1
• Delivery Time: 10-15 DAYS
• Packaging Details: CUSTOMER REQUEST

Product Details:

AVAIABLE IN WOODEN / STAINLESS STEEL , Test tube racks are laboratory equipment used to hold upright multiple test tubes at the same time. They are most commonly used when various different solutions are needed to work with simultaneously, for safety reasons, for safe storage of test tubes, and to ease the transport of multiple tubes.

Additional Information:

• Item Code: BTL64
• Production Capacity: 1
• Delivery Time: 1 WEEK
• Packaging Details: AS PER REQUEST

Product Details:

Deep freezers are the testing equipment that are used to preserve and store food products, medical equipment, blood samples, medicines and injections, etc. for a long period of time.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 10 working days

Product Details:

LABORATORY JACK (M.S) ,  laboratory jack, an all purpose constructed from stainless steel, mild steel. Suitable for lab stirrers, hot plates, burners, baths, glassware many more items. it is a knob operated scissor action lifting mechanism for quick, easy accurate height adjustment.

Additional Information:

• Item Code: BTL-34
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days

Product Details:

The Laboratory Flocculator, offered by us, is used to estimate the dosing of alums and such other coagulants for treatment of water & effluent. With the use of our Laboratory Flocculator, the samples are easily viewed by diffused base illumination with fluorescent tube placed below plastic plate & black background. The Laboratory Flocculator is fitted with D.C. motor of 1/20 HP with variable speed up to 50-100 RPM controlled by speed regulator.

Specification:

• Provided with stainless steel paddles with adjustable spacers to adjust the depth of paddles Estimate the dosing of alums & such other coagulant for treatment of water & effluent.
• Samples are easily viewed by diffused base illumination with fluorescent tube placed below plastic plate & black background
• Fitted with D.C. motor of 1/20 HP with variable speed upto 50-100 RPM controlled by speed regulator.
• Provided with stainless steel paddles with adjustable spacers to adjust the depth of paddles.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days

Product Details:

Laboratory Oil Bath has double walled construction with inner side made up of stainless steel & outer side of mild steel sheet duly powder coated. The gap between the two walls of Laboratory Oil Bath is fitted with high-grade glass wool to minimize thermal loss. The temperature range of Laboratory Oil Bath varies from ambient 50°C to 250°C accuracy ± 2°C.

Other Details: The temperature maintains to work on 2201230 volts A.C. supply

Features:

• Double walled with inside made up of stainless steel & outside of mild steel sheet duly powder coated.
• The gap between the two walls is fitted with high — grade glass wool to minimize thermal loss.
• Temperature range from ambient 50°C to 250°C accuracy ± 2°C.
• The temperature maintains to work on 2201230 volt s AC. supply.

Specification:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days

Product Details:

We have specialized in the manufacturing and supplying of Vacuum Pump in all over the country. The Vacuum Pump is majorly used for filtration purpose and also for vacuum oven. The Vacuum Pump has HP motor and it is supplied with vacuum gauge and Oil. The Vacuum Pump has excellent performance coupled with longer service life.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days

Product Details:

Variable speed PMDC Geared Motor continuous duty RPM 0 to 200 S.S. Tray Lotus clamp.

Product Details:

Additional Information:

• Item Code: BTL-45
• Port of Dispatch: Mumbai
• Delivery Time: 20 working days