Industrial Oven and Equipments

Product Details:

Digital COD Digester is suitable for COD method for monitoring waste water influent & effluent, industrial process water & more this instrument is used by Pollution Control Labs. Outer cabinet made of mild steel duly coated. Double wall construction with insulation for minimum heat losses increases the efficiency of the system. Aluminum Block with holes dimension is used to hold 15 nos. COD tubes Aluminum block is heated to maintain temperature up to 180 ºC solid state digital temperature controller, appropriate heater & insulation selection assure uniformity in all the samples. Selectable time up to 120 min with alarm is provided to set the digestion period(Refluxing) After digestion, analyse the sample with wither colorimetric or Titrimetric method.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 10 working days

Product Details:

Double walled inside made up of S.S & outside of M.S. sheet duly powder coated & gap between two walls is fitted with high grade glass wool to minimize thermal loss.

Optional Accessories:

• Digital Temperature Controller cum Indicator

Product Details:

Additional Information:

• Item Code: BTL-42

Product Details:

Diaphragm vacuum pumps represent one of several pump designs ideal for creating vacuum conditions in the laboratory. As they avoid the need for pump oil, diaphragm pumps offer much higher corrosion resistance and typically require much less service support than oil-sealed pumps.

Product Details:

In Autoclave the Inner chamber is made up of thick stainless steel (304) & the Outer body is made up of thick Mild Steel / Stainless Steel. The chamber is absolutely leak proof & can be operated at any selected point in between 5 to 20 pounds per sq.inch.

Product Details:

Fitted with a FHP motor, it can accommodate six sieves of Speed can be regulated through a continuously variable speed regulator fitted to the unit. To work on Supplied without sieves.

Additional Information:

• Item Code: BTL-48

Product Details:

Optional Accessories:

• Digital Temperature indicator cum Controller
• Air circulation Fan with Motor
• Digital timer with Temperature Controller

Product Details:

Additional Information:

• Item Code: BTL-27
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Delivery Time: 7 working days
• Packaging Details: AS PER THE REQUEST

Product Details:

Microbiology International carries a complete line of laboratory sterilizer units including vertical, bench top, high capacity, double door or pass through autoclave units, and specially designed BSL-3 Autoclave units. Purchasing a laboratory sterilizer from Microbiology International insures you are receiving the highest quality and most advanced autoclave available on the market.

Product Details:

Seal from 0 to 20 Kegs                                        

Additional Information:

• Item Code: BTL-51

Product Details:

Features:

• Working chamber: Poly Carbonate Desiccators
• Outer chamber: Stainless steel
• Provided with DIAL type vacuum gauge & vacuum release valve.

Additional Information:

• Item Code: BTL-37

Product Details:

Heating mantles are made to accommodate several size of round bottom flask & to provide uniform heating maximum surface temp of 400ºC with energy regulator box built in.

Specifications:

Product Details:

Vacuum ovens are commonly using the temp range from 50 ºC to 200 ºC. The inner chamber is made out of stainless steel 304 & outer of stainless steel 304, glass wool insulation is provided all around the chamber to minimize heat loss due to radiation. The door is provided with a glass window to view the samples placed inside. The digital temp is controlled & indicated by a Maximum vacuum: 760 mm of Hg. Mains 220\ 230 V.AC

Round:

Rectangular:

Product Details:

For determination of melting points up to 350 ºC. The mounted block is illuminated from below by a lamp fixed in its housing. The aluminum blocks accept three capillary tubes & mercury thermometer. The temperature is regulated by energy regulator fitted to the unit. The lamp provides uniform & shadow less regulator fitted to the unit.

Product Details:

Double walled inner made of thick S.S 304, outer made of heavy duty S.S 304. Temp range 50°C to 250°C Temp accuracy ± 2°C controlled by micro processor based digital controller & air circulation for better uniformity. Supplied with s.s. wire mesh sieves.

Product Details:

Additional Information:

• Item Code: BTL-28

Product Details:

Suitable for carry out different quality control tests under controlled conditions of temperature & humidity. Inner chamber is made of stainless steel & outer wall of mild steel sheet duly powder coated. Puff Insulation provided between two walls. Inner stainless steel with 2/3 nos adjustable wire mesh shelves. For temperature below ambient temperature range 10 ºC to 60 ºC. Humidity range 40% above 85% RH complete with sealed compressor unit wet dry, bulb & electronic digital indicator cum temperature Reservoir rating is approx 3.5 K.W (Max).

Additional Information:

• Production Capacity: 4
• Delivery Time: 15-20DAYS
• Packaging Details: AOR

Product Details:

Vacuum ovens are commonly using the temp range from 50 ºC to 200 ºC. The inner chamber is made out of stainless steel & outer of MS sheet beautifully powder coated, glass wool insulation is provided all around the chamber to minimize heat loss due to radiation. The door is provided with a glass window to view the samples placed inside. The digital temperature is controlled & indicated by a Maximum vacuum: 760 mm of Hg. Mains 220\ 230 V.AC

Product Details:

Suitable for carry out different quality control tests under controlled conditions of temperature & humidity. Inner chamber is made of stainless steel & outer wall of mild steel sheet duly powder coated. Puff Insulation provided between two walls. Inner stainless steel with 2/3 nos adjustable wire mesh shelves. For temperature below ambient temperature range 10 ºC to 60 ºC. Humidity range 40% above 85% RH complete with sealed compressor unit wet dry, bulb & electronic digital indicator cum temperature Reservoir rating is approx 3.5 K.W (Max).

Product Details:

Additional Information:

• Port of Dispatch: Mumbai
• Delivery Time: 20 days

Product Details:

Fume hoods provide proper and continuous ventilation and airflow and ensure that GMP standards are met and can meet the demand of a large flow of toxic chemicals in the air. The fume hood disposes of the hazardous material offsite to allow the lab workers a safe and sanitary place to work.

Product Details:

Product Details:

• Digital only Temperature single Basket without Beaker       
• Digital only Temperature Double Basket without Beaker     

Additional Information:

• Item Code: BTL-52
• Production Capacity: 1
• Delivery Time: 20-25 days
• Packaging Details: corrugated box with thermocol charges extra as applicable

Product Details:

Most suitable to measure the diameter of the inhibited zone in microbiology, Botany, Zoology, Bacteriology & Pathology Labs. Unique in design & suitable for measuring the diameter of inhibited zone within the range of 0 to 35 mm with accuracy 0.2mm


Features:

• Manual Model
• Digital Model
• Air Circulations

Product Details:

Double walled construction on heavy iron angle, inner chamber made of Mild steel painted with temperature. Resistant paint & outer finished with hammer tone paint. Insulation is done by glass wool. Controlled by Electronic Digital Temperature indicator Cum Controller with an accuracy. Air circulation is provided by heavy duly powder with ON / OFF switch indicator ventilations are provided on the top of Oven.

Product Details:

Additional Information:

• Delivery Time: 5 to 6 weeks
• Packaging Details: As per request

Product Details:

As per the request - in mild steel / stainless steel

Additional Information:

• Delivery Time: 1 week
• Packaging Details: AS PER REQUEST

Product Details: